Jacuzzi HE96000 - Manual (Page 20)

Comfort PLUS Whirlpool Bath
Page 20 www.jacuzzi.com Installation and Operation
English
*Add ¼" (6mm) to this dimension when roughing-in for 3-wall niche.
Corner Baths
MODEL
PRODUCT
WEIGHT
OPERATING
GALLONAGE
TOTAL WEIGHT/
FLOOR LOADING DIMENSIONS
DRAIN/OVERFLOW
DIMENSIONS
SKIRT &
MOUNTING CUTOUT HEATER
60" (1524 mm) L
60" (1524 mm) L
20-¾" ( 527 mm) H
984 lb
(447 kg)/
39 lb/ft 2
(190 kg/m 2 )
74 U.S. gal
(280 liters)
118 lb
(54 kg)
TARA™ PLUS
LH, RH, LBM, RBM
16" (406 mm) A
12-⅜" (314 mm) B
Optional See
Pages
12-13
Factory Installed
(S750000 HEATER KIT)
60" (1524 mm) L
60" (1524 mm) L
20-½" ( 521 mm) H
1177 lb
(535 kg)/
47.1 lb/ft 2
(229 kg/m 2 )
Min 55 U.S. gal
(208 liters)
Max 90 U.S. gal
(341 liters)
130 lb
(59 kg)
CAPELLA™ PLUS
LH, RH
18" (406 mm) A
12-⅛" (314 mm) B
Optional See
Page 12
Factory Installed
(S750000 HEATER KIT)
60" (1524 mm) L
60" (1524 mm) L
20-½" ( 521 mm) H
1038 lb
(472 kg)/
41.5 lb/ft 2
(202 kg/m 2 )
Min 55 U.S. gal
(208 liters)
Max 90 U.S. gal
(341 liters)
140 lb
(64 kg)
CAPELLA™ PLUS
WITH INTEGRAL
SKIRT
RFM
18" (406 mm) A
12-⅛" (314 mm) B
Integral NA Factory Installed
(S750000 HEATER KIT)
60" (1524 mm) L
60" (1524 mm) L
20-¾" ( 527 mm) H
1160 lb
(527 kg)/
46.4 lb/ft 2
(226 kg/m 2 )
Min 61 U.S. gal
(231 liters)
Max 87 U.S. gal
(329 liters)
135 lb
(61 kg)
TARA™ PLUS WITH
INTEGRAL SKIRT
RH
16" (406 mm) A
12-⅜" (314 mm) B
Integral NA Factory Installed
(S750000 HEATER KIT)
DRAIN/OVERFLOW
A
B
SPECIFICATIONS
(Corner) LH=Left Hand MTR, RH=Right Hand MTR, LBM=Left Back MTR, RFM=Right Front MTR,
RBM=Right Back MTR
H
SIDE VIEW END VIEW
2”
CAPELLA ™ PLUS LEFT HAND MOTOR
(50,8 mm)
(Suction Heater)
(Motor)
TARA™ PLUS Left-Hand BACK MOTOR
L
H
SIDE VIEW END VIEW
2”
(51 mm) (Motor)
(Suction Heater)
L
H
SIDE VIEW END VIEW
2”
TARA ™ PLUS LEFT HAND MOTOR
(51 mm)
(Suction Heater)
(Motor)
CAPELLA 60 WITH INTEGRAL SKIRT
1"
(25 mm)
H
FRONT VIEW SIDE VIEW
TARA™ PLUS Right-hand BACK MOTOR
L
H
SIDE VIEW END VIEW
2”
(51 mm)
(Motor)
(Suction Heater)
H
SIDE VIEW END VIEW
1”
TARA ™ PLUS with Skirt RIGHT HAND MOTOR
(25,4 mm)
(Suction Heater)
(Motor)
The overall dimensions are nominal with a tolerance of +0 and -¼˝ (6mm).
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeat TM : 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 Amp, 60 Hz. dedicated GFCI protected separate circuit.