GE RM24973 - Manual (Page 11)

Clearing A Learned Button
To clear a learned button sequence, use the procedure
below. Note: No functions may be stored under the
LEARN, SETUP, or any of the device buttons.
1. Press and hold the SETUP button
until the INDICATOR LIGHT
lights, then release the SETUP
button.
2. Press and release the desired
Mode button (TV, VCR, DVD,
etc. . . ). The INDICATOR
LIGHT will blink off once the
button press is accepted.
3. Press and release the LEARN
button twice. The INDICATOR
LIGHT will light off once the
button press is accepted.
4. Press and release the SETUP
button and the remote will
return to original operation
mode. All learned command
functions under the device are
now cleared.
Clearing All Learned Buttons
This procedure will erase all learned functions in every
device mode. This step is recommended when attempting
any learning of a new function from a new remote.
1. Press and hold the
SETUP button until the
INDICATOR LIGHT
lights, then release the
SETUP button.
2. Press and release the
LEARN button twice. The
INDICATOR LIGHT will
light off once the button
press is accepted.
3. Press and release the SETUP
button and the remote will
return to original operation
mode. All learned com-
mand entries are now cleared.
10