JVC CA-EX90 - Manual (Page 44)

44
CA-EX90
Remote Control of the Other Optional Components
The remote control provided with the units can be used to control the optional components such as
the CD player and cassette deck .
Operate the remote control by pointing it to the remote sensor of the amplifier/tuner.
Controlling the CD player
Use the following buttons to remote control the CD player.
CD: Selects the CD player as the sound source and make it
start playback of a loaded CD.
3: Starts playback.
4 1 , ¢ ¡: Skips to the beginning of a track.
7: Stops playback.
CD 1: Starts playback of the CD with disc No. 1.
CD 2: Starts playback of the CD with disc No. 2.
CD 3: Starts playback of the CD with disc No. 3.
Shortcut playback
Pressing CD or one of CD1 to 3 starts playback
immediately.
Number buttons
1 to 10, +10: Used to specify a track number directly after
pressing CD, CD1, CD2, CD3 or PLAY MODE.
To select track No. 5: Press 5.
To select track No. 15: Press +10 then 5.
To select track No. 20: Press +10 then 10.
To select track No. 32: Press +10 three times then press 2.
Controlling the cassette deck
Use the following button to remote control the cassette
deck.
TAPE: Selects the cassette deck as the sound
source and make it start playback of the inserted tape.
TAPE CONTROL: Switches the remote control mode to the
tape mode without selecting the cassette deck as the
sound source.
TAPE DIRECTION: Swiches the tape running direction.
3: Starts playback or recording.
4 1 , ¢ ¡: Press during playback to skip to the
beginning of a piece of music.
Press during stop to fast forward or rewind tape.
7: Stops playback or recording.
REC PAUSE: Initiates record-pause mode.
Shortcut playback
Pressing TAPE ( or TAPE CONTROL then
3 )starts playback
immediately.
CD
CD 3 CD 2 CD 1
1 2 3
4 5 6
7 8 9
10 +10
TAPE
DIRECTION
TAPE CONTROL
TAPE
EN41-52.CA-EX90[J]/1 98.6.8, 8:28 AM 44