Jura Capresso X90/X95 - Manual (Page 17)

17
Ⅲ
CLEAN NOW
An acoustic signal indicates the need of an immediate cleaning.
14.7 Unit calcified
Ⅲ
UNIT CALCED
The machine signals when decalcifying becomes necessary.
Under the correct implementation of Claris filter cartridges,
decalcifying of the machine becomes unnecessary. For
further indications read Chapter 7 “Use of Claris filter cart-
ridges“.
14.8 Cleaning metal contacts
Ⅲ
EMPTY TRAY / CLEAN CONTACTS
Ⅲ The remnants of the calcified deposits in the area of the metal
contacts must be removed. Proceed as follows:
Ⅲ Rinse fastenings in groove (B) as well as the metal contacts (A)
with hot water and some washing-up liquid. Then clean the
fastenings in groove (B) as well with a brush (Fig. 8).
14.9 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine.
Ⅲ Wipe down the casing inside and out using a soft, damp cloth.
Ⅲ Clean the pivoting nozzle after every use.
Ⅲ After warming milk, draw off some hot water to clean the
pivoting nozzle inside.
Ⅲ You can take off the Profi Auto-Cappuccino/Caffè Latte for a
thorough cleaning.
Ⅲ The water tank should be rinsed and filled with clean water
daily.
If you notice any furring in the water tank, this can be de-
calcified separately with a customary decalcifying agent.
Remove the tank from the machine for this purpose.
If a Claris filter cartridge is used, remove it beforehand.
14.10 Regular servicing
Regular Jura services ensure your machine‘s reliability and longer
life. Keep the original packaging to protect the machine while
being transported.
14.11 Empty system
This procedure is necessary to prevent your machine from
frost damage while being transported.
Ⅲ Put a container under the pivoting nozzle (20).
Ⅲ Press selector key
and remove water tank
Ⅲ
STEAM INTAKE
Ⅲ
PRESS STEAM / FILL SYSTEM
Ⅲ Switch off machine by pressing ON/OFF key
.
15. Cleaning
The machine has an integrated cleaning program. The procedure
lasts about 15 minutes.
Please use Jura cleaning tablets only. These are available from your
Jura dealer.
It is essential not to interrupt the process once it has been
started.
Ⅲ Switch on your machine by pressing ON/OFF
key
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ
EMPTY TRAY (FILL WATER might show as well)
E