Connecting the drive cables – JVC MP-XP731GB User Manual
Page 121
15
ENG
L
IS
H
Connecting the Drive Cables
1. Connect the USB cord - B series plug to the drive USB 2.0 connector.
2. Connect the USB cord - A series plug to the USB 2.0 connector of your notebook,
PC.
3. Connect the adapter cable to DC IN power connector on your drive.
4. If necessary, use AC plug adapter to fit power outlets in your area. See next
section for instructions on how to use the AC power adapter and AC plug adapter.
5. Connect the AC power adapter and AC plug adapter to a power source.
All the cable plugs are slotted so that they fit in only one
orientation. If a plug does not fit in completely, try reversing it.
DO NOT use too much force when fitting the cable plugs.
Power plug types may vary in different countries or regions
around the world.
Notebook or PC
USB 2.0
cable and
connector
MP-WDX2E
DC IN connector
AC power adapter and AC plug adapter
MP-WDX2E-En.fm Page 15 Friday, September 19, 2003 9:29 AM