JVC GET0483-001A - Manual (Page 13)

13
ENGLISH
Indication, [Range]
LOUD * 4 (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
SUBWOOFER * 1 , [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL ADJ (volume adjust), [–05 to +05, initial: 00]
Adjust the volume level of each source (except FM), in
relation to the FM volume level. The volume level will
automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
VOLUME, [00 to 50 or 00 to 30 ]* 5
Adjust the volume.
* 1 Displayed only when “L/O MODE” is set to “SUB.W”
(see page 15).
* 2 If you are using a two-speaker system, set the fader
level to “00.”
* 3 This adjustment will not affect the subwoofer output.
* 4 The adjustment made (LOUD ON/LOUD OFF) will be
applied to all sound modes.
* 5 Depending on the amplifier gain control setting. (See
page 15 for details.)
Storing your own sound mode
You can adjust the sound modes and store your own
adjustments in memory.
1
Select a sound mode.
2
Enter the adjustment mode.
• If no operation is done within
5 seconds, this mode is canceled.
3
Select a sound characteristic.
4
Adjust the sound elements of the selected
sound characteristic.
1 Adjust the frequency.
2 Adjust the level.
3 Adjust the quality slope (Q).
Sound
elements
Range/selectable items
BASS MID TRE
Frequency 60 Hz
80 Hz
100 Hz
120 Hz 500 Hz
1.0 kHz
1.5 kHz
2.5 kHz 7.5 kHz
10.0 kHz
12.5 kHz
15.0 kHz
Level –06 to
+06 –06 to
+06 –06 to
+06
Q (Q-slope) Q0.5
Q1.0
Q1.5
Q2.0 Q0.75
Q1.0
Q1.25
Q1.5 Q0.75
Q1.25
BASS: Bass MID: Mid-range TRE: Treble
5
The adjustment made will be stored
automatically. Repeat steps 3 and 4 to adjust
other sound characteristics.
EN06-13_KD-APD49[J]f.indd 13 EN06-13_KD-APD49[J]f.indd 13 11/20/07 10:24:06 AM 11/20/07 10:24:06 AM