Reproducing the sound field – JVC RX-6010VBK User Manual
Page 22
19
Reproducing the Sound Field
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects.
JVC Theater Surround and DAP modes can create these important
elements, and give you a real “being there” feeling.
Direct sounds
Early reflections
Reflections from
behind
DAP modes
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects. The DAP
mode can create these important elements, and gives you a real
“being there” feeling. This mode can be used when the front
speakers are connected to this receiver (without respect to the
rear/center speaker connection).
You can select one of the following to your preference.
LIVE CLUB:
Gives the feeling of a live music club with a low
ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL:
Gives clear vocal and the feeling of a concert hall.
PAVILION:
Gives the spacious feeling of a pavilion with a high
ceiling.
BUTTON
SURROUND MODE
(On the remote control)
BUTTON
SURROUND ON/OFF
*
DSP MODE
(On the front panel)
MODE
SURROUND ON
THEATER
LIVE CLUB
DANCE CLUB
HALL
PAVILION
DSP OFF
(SURROUND OFF)
ANALOG
⅜
⅜
⅜
⅜
⅜
⅜
⅜
(2 CH)
(DOLBY PRO LOGIC)
ANALOG
ן
ן
ן
ן
ן
ן
ן
(5.1 CH)
(DOLBY PRO LOGIC)
LINEAR PCM
⅜
⅜
⅜
⅜
⅜
⅜
⅜
(DOLBY PRO LOGIC)
DOLBY DIGITAL
⅜
*
1
ן
ן
ן
ן
ן
⅜
(DOLBY DIGITAL)
DTS
⅜
*
2
ן
ן
ן
ן
ן
⅜
(DTS SURROUND)
*
1
When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DOLBY DIGITAL is selected.
*
2
When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DTS SURROUND is selected.
Available DSP modes according to the input mode
*
You can also use SURROUND on the remote control to activate the surround mode.
⅜
: Possible
ן
: Impossible
INPUT
EN18_24.RX-6010&6018V[J]_f
00.12.5, 1:58 PM
19