JVC HR-J658EE - Manual (Page 18)

18
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
Express Timer
Programming
Remember, the clock must be set before you can
programme the timer (
੬
pg. 9).
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button.(
੬
pg. 26)
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.. (If you’re just
starting out, “P1” appears.)
ENTER PROGRAMME
START TIME
2
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
3
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
4
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
5
Press TV PROG +/–.
TIMER RECORDING
– P1 –
START STOP
–:– – = –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
21:00 = –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.12 1
[+/–] =
[PROG] : EXIT
START+/–
DATE+/–
STOP+/–
TV PROG+/–
PROG.
COLOUR SYSTEM