JVC DR-DV5000 - Manual (Page 5)

File Identification Naming and
Scene Marking
DR-DV5000 files are identified by TRACK
and VOLUME (disk drive) number on the
LCD. For instance, a file on the DR-DV5000
LCD identified as 1-043 is clip number 43 on
Volume (disk) 1.
On a computer, files are identified by their
base file name made up of DATE and TIME.
For instance, a clip named 20030615-210943-
01.mov is a clip that began recording at
9:09:43PM on June 15th. 2003.
Clips can also be organized into pre-named
folders on the disk drive using the Scene
Marking feature. If a clip has been Scene
Marked, it will be displayed in brackets
(e.g. <XXXXXX>) above the soft key labels
on the LCD. Mark clips during REC, STOP
or PLAY modes using the supplied remote
commanders or by pressing SHFT+DISP.
While holding SHFT, press DISP to scroll
through available folders. At the close of a
session, select MENU -> UTILITIES -
>ORGANIZE FOLDER. See the User Guide
for more information on Scene Marking.
DR-DV5000 Main Features
Spend time navigating through the DR-
DV5000 MENU System. DR-DV5000’s
MENU has eight main menu categories:
Record Mode, Play Mode, Play From, Control
Mode, HDD Bypass, Record Format, Setup
and Utilities.
Functions in the DR-DV5000 MENU include:
RECORD MODES:
NORMAL RECORD - DR-DV5000 front
panel or remote control trigger of record.
RETRO DISK - Constantly buffers video in a
loop to a determined amount of space on the
HDD so that when record is triggered, a retro
time period can be added to the beginning of
any clip.
RETRO CACHE - Same as above, but utilizes
a 10 second data buffer to cache video instead
of the HDD.
LOOP RECORD- Allows video to be recorded
while in normal record modes as an endless
loop on available HDD space.
SNAP - Any record trigger will result in only
a single frame of video being recorded to disk.
TIME LAPSE - User definable time lapse
setup menu.
DUMP TO DISK - Allows contents of tape in
camcorder to be automatically recorded to HDD.
DUMP TO TAPE - Allows contents of the
HDD to be automatically recorded to tape in
the camcorder.
PLAY MODES:
PLAY CLIP - When play is triggered, the
selected clip will play from start to finish and
then pause.
LOOP CLIP - When play is triggered, the
selected clip will continuously loop play from
start to finish.
LOOP ALL - When play is triggered, the
entire contents of the HDD will loop play
from start to finish.
PLAY ALL - When play is triggered, the
entire contents of the HDD will play from
start to finish and then pause.
FireStore DR-DV5000 QuickStart Guide
PAGE 5