JVC Model KD-S580J - Manual (Page 14)

14
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
(Bass) |
+06 (max.)
TRE Adjust the treble. –06 (min.)
(Treble) |
+06 (max.)
FAD Adjust the front R06 (Rear only)
(Fader)* and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
(Balance) and right speaker |
balance. R06 (Right only)
VOL Adjust the volume. 00 (min.)
(Volume) |
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
2
Adjust the level
Note:
Normally the + and – buttons work as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce well-balanced sound at low volume level.
Each time you press LOUD, the loudness function
turns on and off alternatively.
@
A
To increase the level.
To decrease the level.
Bass level indicator Treble level indicator
EN14-16-KD-S6250/S580[J]-6 11/7/01, 7:50 PM 14