JVC TM-H150CG - Manual (Page 15)

14
How to Use SET-UP MENU
(cont’d)
WHITE BALANCE
Adjusts the white balance.
NOTE:
You can adjust the items in “WHITE BALANCE” separately for each
color temperature (6500 or 9300). Select the color temperature you
want to adjust beforehand.
Cut-off adjustment
• Select “WHITE BALANCE”
on SET-UP MENU, then
press the VOLUME/
SELECT (+) button to
display the setting display
for the cut-off adjustment.
7R. CUTOFF
Adjusts the cut-off point of the red signal.
• –20
“ 00 “ +20
7G. CUTOFF
Adjusts the cut-off point of the green signal.
• –20
“ 00 “ +20
7B. CUTOFF
Adjusts the cut-off point of the blue signal.
• –20
“ 00 “ +20
Drive level adjustment
• Select “WHITE BALANCE” on
SET-UP MENU, then press
the VOLUME/SELECT (–)
button to display the setting
display for the drive level
adjustment.
7R. DRIVE
Adjusts the drive level of the red signal.
• –20
“ 00 “ +20
7B. DRIVE
Adjusts the drive level of the blue signal.
• –20
“ 00 “ +20
NOTE:
You can turn off the on screen display during the adjustment of the
white balance by pressing the
%
button.
CONTROL LOCK
Prohibits the monitor operations except turning on/off
the monitor and adjusting volume. The menu operations
are also prohibited.
• ON: Activates this function.
• OFF: Deactivates this function.
NOTES:
• When “CONTROL LOCK” is set to “ON,” “CONTROL LOCK ON!”
appears on the screen if you try to operate the monitor.
• You can deactivate this function on SET-UP MENU when
“CONTROL LOCK” is set to “ON.”
STATUS DISPLAY
If “COLOR SYSTEM” is set to “AUTO,” you can display
the color system (NTSC or PAL) of the current input
signal when turning on the monitor or when changing
the input.
• ON: Displays the color system (NTSC or PAL) of the
current input signal.
• OFF: Does not display the color system (NTSC or
PAL) of the current input signal.
NOTE:
The color system does not appear on the screen when the component
signal, RGB signal, or black-and-white signal is input.
REMOTE SYSTEM
Selects the method of the external control connected to
the REMOTE terminal.
\ For details, see page 15.
• MAKE (make contact system)
• TRG. (trigger system)
INPUT REMOTE
Sets how to change the input when operating the
monitor by the external control.
\ For details, see page 15.
• A–D
• A/B
NOTE:
“INPUT REMOTE” appears on the screen only when “REMOTE
SYSTEM” is set to “MAKE.”
EXIT
R. CUTOFF: 00
R • G • B DISP
(When “R. CUTOFF” is selected.)
EXIT
R. DRIVE: 00
R • B DISP
(When “R. DRIVE” is selected.)
[10-15]_TM-H150CG.p65 04.1.17, 4:05 PM 14