JVC AV-21YS24 - Manual (Page 7)

7
1 Connecting the aerial cable.
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable and audio cables. For details, see the manual
of your VCR.
The illustration shown is just a sample. It may not be same as your
TV.
2 Connecting the compatible main plug to the AC outlet.
3 Inserting batteries into the remote control.
Insert two batteries by following the
+ and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
4 Turn on the TV by pressing the main power button.
JVC logo appears on the screen.
V
L
R R
L/MONO
Y
C B
C R
/V V
L
R
/MONO
OUTPUT VIDEO-1
INPUT
To RF
output To video
output
To aerial input
To audio
output
COMPONENT
(VIDEO-2) INPUT
Rear of TV
AV-20NX50
VHF/UHF outdoor aerial
VCR
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
GGT0096-001A-H_EN 07/04/2005, 6:30 PM 7