Jura Capresso IMPRESSA XS90 - Manual (Page 21)

21
Ⅲ Now press the Rotary Switch (4) to access the Information
menu.
Ⅲ
TOTAL
1000 (example)
Ⅲ Turn the Rotary Switch (4) to display how often you made
espresso, 2 espressos, 1 coffee, 2 coffees, coffee à la carte, pow-
der, water and steam.
Ⅲ Finally, the number of cleaning and decalcifying cycles and filter
changes are displayed.
Ⅲ To exit the information program, press the Rotary Switch (4).
Ⅲ
INFO
Ⅲ Now turn the Rotary Switch (4) until the following message is
displayed:
Ⅲ EXIT
Ⅲ Now press the Rotary Switch (4) to leave the programming
mode.
Ⅲ
SELECT PRODUCT
14. Lock functions
If you install your IMPRESSA in a self-service area, you
may wish to protect certain settings through a combination of
buttons. You can therefore lock the programming function
and disable the drawing of coffee à la carte.
14.1 Locking/releasing the drawing of coffee
à la carte
Ⅲ Switch your machine off by pressing the ON/OFF button .
Ⅲ Open the programming door (3)
Ⅲ Hold the Rotary Switch and the selection button for pre-ground
coffee pressed down at the same time and wait until STOP
appears in the display.
The coffee à la carte button is now locked and can no longer
be used to alter the amount of powder or water for individual
beverages. To release the coffee à la carte button again, you
should proceed as follows:
Ⅲ Switch your machine off by pressing the ON/OFF button .
Ⅲ Open the programming door (3)
Ⅲ Hold the Rotary Switch and the selection button for pre-ground
coffee pressed down at the same time and wait until OK appears
in the display.
14.2 Locking the programming function
Ⅲ Switch your machine off by pressing the ON/OFF button .
Ⅲ Open the programming door (3)
Ⅲ Hold the Rotary Switch and the coffee à la carte draw-off button
pressed down at the same time and wait until STOP appears in
the display.
The Rotary Switch can no longer be used to gain access to
the Programming mode. To release Programming mode
again, you should proceed as follows:
Ⅲ Switch your machine off by pressing the ON/OFF button .
Ⅲ Open the programming door (3)
Ⅲ Hold the Rotary Switch and the coffee à la carte draw-off button
pressed down at the same time and wait until OK appears in the
display.
15. Maintenance
15.1 Filling the water tank
Ⅲ
FILL
WATER TANK
E