Jura Capresso S9 - Manual (Page 3)

1. Fill the thermal milk container with milk and attach to the
frothXpress system. Important: Make sure all parts are
connected tightly, otherwise siphoning does not work.
2. Set the frothXpress dial to the 12 o’clock position for
frothing for cappuccino or to the 6 o’clock position for
steaming for latte.
3. Place a cup underneath the Cappuccino System.
4. Push the Cappuccino button. The S9 OT starts grinding,
the display shows CAPPUCCINO , then coffee strength
(bean graphic). It siphons, heats and froths milk for 14
seconds and adds 2 oz. of high-pressure brewed coffee.
Display shows ENJOY then COFFEE READY .
5. For hotter milk in either position move the frothXpress dial
towards the (+) plus symbols.
NOTE: For preparing Café Mocha, Latte Macchiato, Hot Milk
and Hot Chocolate see Instruction Book (page 19).
G) Cappuccino Rinsing:
After preparing a beverage with milk, the S9 OT shows
COFFEE READY / RINSE CAPPUCCINO and the Rinse
button illuminates. It takes a few seconds and makes sure
that your frothXpress is free of any milk.
• Turn frothXpress dial to the 3 o’clock position and place a
cup underneath the cappuccino system.
• Push Rinse button CAPPU. RINSING . Hot water flows
through the frothXpress and stops. COFFEE READY .
• Turn the frothXpress dial back to your preferred position.
H) Factory Settings, Beverage Buttons:
• All coffee buttons are set to temperature
HIGH .
• The hot water temperature is set to XHIGH .
• 1-CUP Espresso button – 2 oz./ STRONG .
• 2-CUP Espresso button – 2 oz. per cup / XSTRONG .
• 1-CUP Coffee button – 5 oz./ STRONG .
• 2-CUP Coffee button – 5 oz. per cup / XSTRONG .
• A La Carte button – 7 oz.
• Cappuccino; one-touch button – 14 seconds milk,
0 seconds pause, 2 oz. coffee / NORMAL .
• Latte Macchiato; one-touch button – 14 seconds milk,
15 seconds pause, 2 oz. coffee / STRONG .
• Milk portion; Selector Dial – 14 seconds milk,
• Water Portion; Selector Dial – 5 oz.;
XHIGH .
All other settings see chapter 5, Operating Instructions.
I) Re-Programming, Beverage Buttons:
Example: Re-program the Cappuccino button to:
4.0 oz. of coffee, extra strong, milk production for
20 seconds, temperature stays as is (HIGH).
COFFEE READY
1. Open Front Cover and push and hold the Rotary Dial
until the display shows MAINTENANCE .
2. Turn Dial to PRODUCTS and push Dial. Display shows
SELECT PRODUCT .