GE RM24940 - Manual (Page 6)

24940 manual 8/19/03 9:04 AM Page 6
CBL AUDIO•AUX
(BLINK)
Clearing A Learned Button
To clear a learned button sequence, use the procedure
below. Note: No functions may be stored under the
LEARN, SLEEP, CODE
SEARCH
or any of the device
CODE
buttons. SEARCH
1. Press and hold the CODE
SEARCH
button until the
INDICATOR LIGHT lights,
then release the CODE
SEARCH
button.
2. Press and release the desired
Mode button (TV, VCR,
CABLE, SAT
, etc. . . ). The SAT DVD
INDICATOR LIGHT will blink
off once the button press is
accepted.
LIGHT
VCR TV
CD
AUX
INDICATOR
CBL/SAT
LEARN
3. Press and release the LEARN
button twice. The INDICATOR
LIGHT
will light off once the
button press is accepted.
CODE
SEARCH
4. Press and release the CODE
SEARCH
button and the
remote will return to original
operation mode. All learned
command functions under the
device are now cleared.
Clearing All Learned Buttons
This procedure will erase all learned functions in every
device mode. This step is rec­
ommended when attempting
any learning of a new func­
tion from a new remote.
LIGHT
CODE
SEARCH
INDICATOR
1. Press and hold the CODE
SEARCH
button until the
INDICATOR LIGHT lights, LEARN
then release the CODE
SEARCH
button.
2. Press and release the
LEARN
button twice. The
CODE
INDICATOR LIGHT will
light off once the button press
is accepted.
SEARCH
3. Press and release the CODE SEARCH button and the
remote will return to original operation mode. All
learned command entries are now cleared.
5