JVC DR-M70SEK - Manual (Page 32)

32
Reco
rdin
g
EN
To cancel finalising (DVD-RW only):
At step 4, press [STOP S], select “Yes,” then
press [ENTER]. Finalising is cancelled and the
unit switches to stop mode.
If appears when [STOP S] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
If “No” is selected and [ENTER] or [RETURN] is
pressed, finalising is continued.
You cannot cancel finalising a DVD-R disc once it
has started.
5
Finalising is complete.
Hint
• Finalising a disc in Video mode automatically
creates a title menu.
• You can use the unit to record or edit a disc
recorded in VR mode even after it is finalised. After
you finalise a disc recorded in Video mode, you
cannot edit or record anything else on that disc.
• To reverse the finalisation of the disc, select “Undo
Finalise” at step 3.
Note
• If you insert a DVD-RW disc finalised with this unit,
“Undo Finalise” will appear instead of “Finalise”.
• DO NOT power off during finalising. This may result
in a malfunction.
Auto finalise
You can finalise discs automatically when the disc
space runs out if you set this in the Setting menu.
1
In stop mode, press [SET UP].
2 Select “Advanced Setting Menu”
using [Cursor
U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3 Select “Recording” using
[Cursor
U / D], then press [ENTER].
4
Select “Auto Finalise” using
[Cursor
U / D], then press [ENTER].
5
Press [ENTER].
6 Select “ON” using [Cursor U / D],
then press [ENTER].
7
Press [SET UP] to exit.
Note
• Auto finalise function is not available for discs
formatted in VR mode.
Finalising 10%
Do you want to cancel ?
No Yes
DVD-RW DVD-RW
Video
DVD-R DVD-R
Recording
DVD-RW Recording Format
Auto Chapter
Timer Programming
Bilingual Recording Audio
External input Audio
Video mode
10 minutes
Main
Stereo
Auto Finalise
E6851BD_EN.book Page 32 Tuesday, August 2, 2005 5:57 PM