JVC LVT1504-005B - Manual (Page 26)

23
ASF/MPEG-2/MPEG-1/DivX file
Example: When an ASF file is played
DVD VR disc
Example: During playback on the Original program*
Example: During playback on the Playlist*
* Pressing TOP MENU/PG or MENU/PL, you can change the play
mode. (See page 25.)
NOTE
• You can change the time information mode (except for MP3/WMA/
ASF/MPEG-2/MPEG-1/DivX). (See page 28.)
• You can also check the playback information on the TV screen. (See
page 27.)
7 Disc information on the display window
The disc indicators on the display window show the current status
of the corresponding disc tray.
Example: When the discs are loaded to disc trays 1, 2 and 5, and the
disc in the disc tray 5 is selected.
7 Screen saver
An image may burn in on a TV screen if a static picture is displayed
for a long time. To prevent this, the system automatically dims the
screen if a static picture is displayed for over 5 minutes (the screen
saver function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 38.
You can move back the playback position by 10 seconds
from the current position.
7 During playback
Press .
NOTE
• This function works in the same title.
• This function is not available during the repeat playback.
• This feature may not work for some discs.
7 During playback
On the remote control:
Press y or 1.
Each time you press the button, the search
speed changes (x2, x5, x10, x20, x60).
To return to normal speed playback
Press 3 (play button).
On the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (x5, x20).
NOTE
• When a DVD VIDEO, DVD VR, VCD, SVCD, or ASF/MPEG-2/
MPEG-1/DivX is played back, no sound comes out during fast-
forward/reverse search.
• When a DVD AUDIO, CD, or MP3/WMA is played back, sound is
intermittent and low during fast-forward/reverse search.
• This feature may not work for some discs/files.
• For MP3/WMA, the search speed is not shown.
• The search speed for DivX is y1, y2, y3 for forward search,
and 11, 12 and 13 for reverse search.
Track number
Elapsed playing time (hour:minute:second)
(during playback only)
Group number Track number
Signal and speaker indicators
Pressing FL DISPLAY
Title number
Pressing FL DISPLAY
Chapter number
Elapsed playing time
(hour:minute:second)
Chapter number
Playlist number
Pressing FL DISPLAY
Chapter number
Elapsed playing time
(hour:minute:second)
Chapter number
One Touch Replay
Fast-forward/fast-reverse
search
Currently loaded disc number
Currently selected disc
number
Playback See page 21 for button locations.
EN_TH-C906020[USUGUX].book Page 23 Thursday, June 29, 2006 5:30 PM