JVC LYT1366-001A - Manual (Page 43)

Copying/Moving Still Image Files
MODE:
You can copy or move still image files between recording media in CF and SD slots using
the on-screen display.
Before proceeding to following steps,
●
Make sure that recording media are inserted in both CF and SD slots.
●
Make sure that enough free space is left in the copy/move destination medium.
Set the power switch to or .
Press MENU. The menu appears.
Press to select [ MEMORY CARD SETTING], then press .
Press to select [ COPY/MOVE], then press .
Press to select [COPY] or [MOVE], then press .
COPY: Files are copied to the destination medium while leaving original files in the source
medium.
MOVE: Files are moved to the destination medium while deleting original files (except read-
only files) in the source medium.
Press to select the direction of copy/move, then press . (SD CF or CF SD)
To copy or move by selecting files
Press to select [FILE], then press .
●
The index display appears.
Press to select a desired file, then press .
●
The check mark ( ) appears on the selected file.