John Mills PRO CERAMIC STRAIGHTENERS - Manual (Page 6)

6
• If the supply cord or any part of the product is damaged, it
must be replaced by the manufacturer or its service agent, or
similarly qualified person, in order to avoid hazard.
• To unplug: grasp the plug not the cord. Do not unplug by
pulling on the cord.
• Switch off at the mains socket before unplugging.
• Incorrect reassembly or repair to the appliance can cause risk
of fire, electric shock or injury to persons when the appliance is
used.
• Save these instructions.
EXTRA SAFETY PRECAUTIONS
1. The unit becomes VERY HOT when in use. Take care to avoid contact
between the hot surfaces of the plates and the skin, particularly
around the face and neck.
2. Do not touch the plates when the appliance is switched on or just
after it has been turned off.
ALLOW AT LEAST 30 MINUTES TO COOL DOWN
BEFORE STORING AWAY.
3. The appliance should NEVER be stored whilst hot or while still
connected to the mains. Always ensure the appliance is switched
off at the mains, unplugged from the mains and it has cooled down
completely before storing.
4. Never wrap the mains cord around the plates. Do not hang up by the
power cord.
5. If the plates are damaged or broken then do not use the appliance.
6. PLEASE ENSURE THE APPLIANCE IS UNPLUGGED AFTER USE.