Jenn-Air 1300 User Manual

Page 27

Advertising
background image

Hermes Operator Note Page 27 of 32

A typical programming sequence display is as follows:

PPPPP...........................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
..........................................PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
PPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP.::::
:

Flash Programming Successful!!

Hermes®, © 2001, Wood & Douglas Ltd.

Apply a DC reset to the modem before using the modem.

If an error in the data is received the modem responds with:

Flash Programming Failed!!

Hermes®, © 2001, Wood & Douglas Ltd.

If power is lost or some other problem occurs before the upload is
completed, the next time the modem is powered on it automatically requests
new data by outputting the above message. This repeats until the code load
is successful.

Advertising
This manual is related to the following products: