JVC KD-LX10R - Manual (Page 24)

24
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
Indication To do: Range
BASS Adjust the bass. –06 (min.) — +06 (max.)
TREBLE Adjust the treble. –06 (min.) — +06 (max.)
FADER* Adjust the front and rear speaker R06 (Rear only) — F06 (Front only)
balance.
BAL Adjust the left and right speaker L06 (Left only) — R06 (Right only)
(balance) balance.
BBE See “What is BBE II ?” on the next page. BBE OFF, BBE 1, BBE 2, BBE 3
VOLUME Adjust the volume. 00 (min.) — 50 (max.)
Note:
*
If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Note:
Normally + / – button works as the volume control. So you do not
have to select “VOLUME” to adjust the volume level.
1 2
Equalization pattern changes as you adjust the bass or treble.
TREBLE BASS FADER
BAL
(balance)
VOLUME BBE
EN24-28.LX10R[E]/F 00.1.12, 6:36 PM 24