JVC TM-A101G - Manual (Page 3)

TM-A101G
1-3
No.51921
ENGLISH Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO A
terminals @ .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
* For corresponding audio signals, use the AUDIO B
terminals # .
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
0 .
The output terminal is bridge-connected.
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminal 0 .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
REAR VIEW
<Rear Panel>
10
11
12
13
14
5
VIDEO A
VIDEO B
AUDIO A
AUDIO B
REMOTE
OUT IN
OUT IN
OUT
OUT
ASPECT INPUT
IN
IN
VIDEO A
VIDEO B
AUDIO A
AUDIO B
REMOTE
OUT IN
OUT IN
OUT
OUT
ASPECT INPUT
IN
IN
10
11
12
13
14
Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
! .
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
terminals ! .
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
Remote terminals
[REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A
or VIDEO B and ASPECT RATIO is available via external
control. External control is set in the <SET-UP MENU>
screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
Note:
● Also refer to BASIC CONNECTION EXAMPLE on
page 12.
External control switch
Open circuit Closed circuit
(open) (short)
ASPECT RATIO 4–3 (4:3) 16–9 (16:9)
INPUT INPUT A INPUT B
External control
functions
Chroma/Phase button
[
CHROMA/ PHASE]
Press this button to activate the picture color density
adjustment mode or picture hue adjustment mode. Each
time you press the button, the adjustment item changes.
Picture color density f Picture hue
Adjust the value with the VOLUME/SELECT buttons 3 .
Also used as a control button in the menu function mode.
Contrast/Brightness button
[CONTRAST
/ BRIGHT ]
Press this button to activate the picture contrast adjust-
ment mode or picture brightness adjustment mode. Each
time you press the button, the adjustment item changes.
Picture contrast f Picture brightness
Adjust the value with the VOLUME/SELECT buttons 3 .
Also used as a control button in the menu function mode.
Volume/Select buttons
[VOLUME/SELECT –
+]
Adjusts the speaker volume. Also used as a control
button in the menu function mode.
Menu button [MENU]
Displays and disappears the <MENU> screen.
Pressing the CHROMA/PHASE button
1 with the Menu
button depressed will display the <SET-UP MENU>
screen.
CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A
0 and AUDIO A @ terminals on the rear panel. The
button lights when selected.
Input B (VIDEO) button [INPUT SELECT B]
Selects the video and audio signals input to the VIDEO B
! and AUDIO B # terminals on the rear panel. The
button lights when selected.
Power indicator
Lights in green when the power is ON.
Lit
: When the power is on.
Unlit : When the power is off.
Power switch [POWER ]
Press this switch to turn the power on or off.
g ON : Power is turned on.
G OFF : Power is turned off.
Speaker
A built-in speaker is located inside the left side panel
when the monitor is viewed from the front.
1
2
3
4
5
6
7
8
9
4
9
ON OFF POWER
INPUT SELECT
CHROMA MENU
PHASE BRIGHT
CONTRAST VOLUME/SELECT A B
ON
OFF
POWER
INPUT SELECT
CHROMA MENU
PHASE BRIGHT
CONTRAST VOLUME/SELECT A B
1 2
4
5 6
3 8 7