JVC A91F5UH - Manual (Page 7)

7
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
English
1. MUTE (p. 14)
Press to turn the sound on and
off.
2. Number buttons (p. 14)
• Press to select channels.
- (hyphen)
• Press to shift the subchannel
from the main channel.
3. SETUP (p. 13)
Press to display the main menu.
4. s / B / K / L (p. 13)
Press to move left / right / up /
down through the items.
5. ENTER (p. 13)
Press to decide the command of
setting when the main menu is
displayed.
6. INFO (p. 16)
Digital mode (DTV)
• Press to display the channel
information, signal type and TV
setting.
Analog mode (TV)
• Press to display the channel
number, signal type and TV
setting.
External input mode
• Press to display the external
input mode, signal type and TV
setting.
7. CHANNEL - / + (p. 15)
Press to select channels and the
external input mode.
8. INPUT SELECT (p. 15)
Press to access connected
external devices
like a BD/DVD recorder.
9. POWER (p. 13)
Press to turn the unit on and off.
10. AUDIO (p. 15)
Digital mode (DTV)
• Press to select the audio
language.
Analog mode (TV)
• Press to select the audio mode.
11. SLEEP (p. 14)
Press to activate the sleep timer.
12. STILL (p. 15)
Press to pause screen image.
13. CH RETURN (p. 14)
Press to return to previously
viewed channel.
14. SCREEN MODE (p. 17)
Press to select aspect ratio
available for the TV screen.
15. BACK (p. 16)
Press to return to the previous
menu operation.
16. VOLUME - / + (p. 14)
Press to adjust the volume.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5 Remote Control Function
Battery Precautions:
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can overheat and rupture.
5 Installing the Batteries
Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.