JVC UX-P550 User Manual

Page 20

Advertising
background image

18

3

Start searching.

The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, “NOTFOUND” appears on the

display.

• To stop searching any time during search, press PTY

SEARCH (while holding SHIFT).

To continue searching after it stops on an unwanted
station

While the indications on the display are flashing, press PTY
SEARCH again (while holding SHIFT).

Switching Temporarily to a Program of

Your Choice Automatically

The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting a
program of your choice (TA, NEWS, or INFO).
• This function works while listening to an FM station

providing the required signals.

While listening to an FM station, select the program type.

TA

Traffic announcement in your area

NEWS

News

INFO

Program the purpose of which is to impart
advice in the widest sense

PTY

SEARCH

ST

ST

Ex. When “NEWS” is selected

(at the same time)

Remote
ONLY

TA/News/Info

TA

NEWS

INFO

OFF

(Canceled)

(at the same time)

How the Enhanced Other Networks function actually
works:

CASE 1

If a station is not broadcasting the program of your
choice

The System continues tuning in to the current station.

«

When a station broadcasting the program of your choice,
the System automatically switches to the station. The PTY
code indicator starts flashing.

«

When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).

CASE 2

If a station is broadcasting the program of your choice

The System automatically switches to the station. The PTY
code indicator starts flashing.

«

When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).

CASE 3

If the station currently tuned in is broadcasting the
program of your choice

The PTY code indicator starts flashing.

«

When the program is over, the indicator stops flashing (the
function still remains active).

AdvancedRadio.fm Page 18 Tuesday, February 17, 2004 10:17 PM

Advertising
This manual is related to the following products: