Jelly Belly Manual Ice Shaver - Manual (Page 3)

3
U
SING
Y
OUR
I
CE
S
HAVER
1. Fill ice cups with water and place in freezer. When frozen solid, loosen ice block
by holding the ice cup in your hand for a few seconds. (Be sure to make extra
ice blocks and store them in the freezer for future use). Ice cubes may also be
used but require more effort to turn the handle.
2. Place an ice block (removed from cup) in the machine. Position the empty ice
cup or small bowl underneath to catch the shaved ice.
3. Put the lid with handle assembly on the machine, press down and twist lid
clockwise until tight. Turn handle clockwise and apply downward pressure to
shave.
4. Place ice in a paper cone or glass, then add your favorite Jelly Belly
™
premium
syrup or beverage to create your own frosty treat.
5. When ice block is completely shaved, empty out any remaining ice pieces and
add a new ice block to make more shaved ice.
C
LEANING
Y
OUR
I
CE
S
HAVER
After each use, shake out any water or ice particles remaining in the machine. It is
not necessary to wash the machine after using ice made only from water. However,
after using flavored ice blocks, wash and dry thoroughly. Do not wash in
dishwasher.
C
OOL
& E
ASY
T
REATS
Super Snow Cones – Shave ice directly into snow cone cups. Mound tops with
additional shaved ice if desired. Dispense your favorite Jelly Belly
™
premium
flavored syrup directly on top of the shaved ice. Combine different syrups to create
your own unique flavors. Because the shaved ice is so fine, it absorbs the flavored
syrup instead of letting it run to the bottom. This gives you a truly intense flavor
sensation, all the way through! Tip: Use flavored ice cubes for unique snow cone
tastes. Freeze fruit juice, soda, flavored yogurt, or flavored milk into cubes. Shave
into cups. If desired, use Jelly Belly
™
premium syrups for added flavor.