JVC LVT1000-004A - Manual (Page 40)

14
English
CASSETTE OPERATIONS
Playing back a cassette
1 Press TAPE to set to the tape mode.
2 Press § STOP/EJECT to open the cassette
holder.
3 Load a cassette with the open side up and the
playback side facing out, then close the
cassette holder.
4 Press
2 PLAY to start playback.
To stop playback
Press
§ STOP/EJECT.
Playback automatically stops when the tape reaches the
end.
To fast-wind a tape
Press
1 FF or ¡ REW.
• To fast-wind in the forward direction: 1 FF
• To fast-wind in the reverse direction:
¡ REW
When the tape reaches the end, press § STOP/EJECT
to release the
1 FF or ¡ REW button.
Notes on cassette tapes
• It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
• Use only normal tapes of type I for playback and
recording.
• Use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch roller and
capstan.
• Loose tape can cause trouble. If you notice some slack
in the tape, tighten it up using a pencil.
To prevent accidental erasure
Remove the tab(s) with a screwdriver. When you want
to erase the recording or re-record on the tape, reseal the
slot(s) with adhesive tape.
STANDBY
SEARCH UP
SEARCH DOWN
REMOTE SENSOR
PLAY/PAUSE
STOP
RANDOM INTRO
RC-ST3
CD PORTABLE SYSTEM
1 4 3 2 1 FF ¡ REW
02_01-18_RCST3SL_E_En.p65 2/20/03, 6:50 PM 14