JVC SP-F508 - Manual (Page 5)

Unpacking the speakers
Speaker cords and screws
LV44076-001A
[UJ]
3 Take out the speakers with its protections (at top
and bottom), then stand them upright with top
side down. Precautions for unpacking:
• Have two persons unpack for safe unpacking and
installation.
• Place a large, thick cloth on the floor where you
unpack the speakers, so you can protect the floor and
the speakers themselves.
1 Take out the packing pad (with speaker cords and
screws) on the top.
2 Take out the speaker grilles and base plates.
• Refer to Instruction about how to attach speaker
grilles and base plates.
Speaker grilles
Base plates
Do not to touch the
speaker units to prevent
damage.
4 Remove the bottom protection.
5 Lift up the speakers to remove the top protection
by pressing it down, then place the speakers on
the cloth.
EN
Take care that
speakers do not
fall over.
Take care that
speakers do not
fall over.
Take care that
speakers do not
fall over.
SP-F508
SP-F508_Caution_f.p65 04.7.26, 4:11 PM 1