Jabra BT160 - Manual (Page 6)

6 7
Using a Jabra Bluetooth adaptor 7
If you want to use the Jabra BT160 with a non Bluetooth mobile phone, the
Jabra A210 adaptor is the answer.
It gives you a cordless connection with the following headset features:
answer/end call and voice dial function (if supported by the phone).
Rejecting a call and last number redial might not be supported through the
headset jack in the mobile phone.
To pair the Jabra BT160 with the Jabra A210
The pairing process is a little different:
•
Put your Jabra BT160 in pairing mode
•
Put the Jabra A210 adaptor in pairing mode
•
Place them close together. You do not need a dedicated pin code to pair
the two Jabra products. Consult the Jabra A210 user manual for more
information
Making/answering a call when using the Jabra A210
•
When you make a call from your mobile phone, the call will
automatically transfer to the headset (if it is turned on)
•
To answer a call: either tap the answer/end button on your headset or
press the answer button on your mobile phone
Need more help?
•
Web: www.jabra.com (for the latest support info and online
User Manuals)
•
E-mail: Tech Support: [email protected]
Information: [email protected]
What the lights mean 6
What you see What this means about your headset
Flashing blue light Flashing every second: active on a call
Flashing blue light Flashing every three seconds: in standby mode 4
Flashing red light Running low on battery
Solid blue light Charging
Solid blue light off Fully charged
Solid blue light In pairing mode – (See section 3)
Troubleshooting & FAQ 8
I hear crackling noises
For the best audio quality, always wear your headset on the same side
of the body as your mobile phone.
I cannot hear anything in my headset
•
Increase the volume on the headset
•
Ensure that the headset is paired with the phone
•
Make sure that the phone is connected to the headset – if it does not
connect either from the phone’s Bluetooth menu or by tapping the
answer/end button, follow the pairing procedure (See section 3)
I have trouble pairing BT160 with my phone
1. You may have deleted your headset pairing in your mobile phone.
Follow the pairing instructions in section 3
2. You can pair your BT160 with up to four different phones or bluetooth
devices. If your BT160 is connected to another phone or other
bluetooth device, disconnect the BT160 from the previously used
phone using the phone set up menu.
3. There is also the possibility that the BT160 is searching for a device to
connect to. Wait 30 seconds and try again.
4. Check the phone screen to ensure that the BT160 is not awaiting a
response from your mobile phone set up menu.
I cannot use Reject call, Call on hold, Redial or Voice dialling
These functions are dependent on your phone supporting them. Please
check your phone’s manual for further details.
Will the Jabra BT160 work with other Bluetooth equipment?
The Jabra BT160 is designed to work with Bluetooth mobile phones.
It can also work with other Bluetooth devices that are compliant with
Bluetooth version 1.1 or 1.2 and support a headset and/or hands-free
profile.