JVC TH-V70 User Manual
Page 39
34
7
DAP (Digital Acoustic Processor) modes
DAP modes
have been designed to create important
acoustic surround elements.
The sound heard in a live club, dance club, hall or pavilion
consists of direct sound and indirect sound—early reflections
and reflections from behind. Direct sounds reach the listener
directly without any reflection. On the other hand, indirect
sounds are delayed by the distances of the ceiling and walls
(see the diagram below).
These indirect sounds are important elements of the acoustic
surround effects. The DAP mode can reproduce a realistic
sound field by adding these indirect sounds.
The following DAP modes are provided with this system.
LIVE CLUB:
Gives the feeling of a live music club with a
low ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL:
Gives clear vocal and the feeling of a
concert hall.
PAVILION:
Gives the spacious feeling of a pavilion with
a high ceiling.
These DAP modes can be used to add the acoustic surround
effects while reproducing 2 channel stereo software, either
analog or Linear PCM, and can give you a real “being there”
feeling.
• When one of the DAP modes is selected, the DSP indicator
lights up on the display window.
Creating sound field
Reflections from behind
Early reflections
Direct sounds
7
All Channel Stereo
All Channel Stereo
(ALL CH ST.)
mode can reproduce a
larger stereo sound field using all the connected (and
activated) speakers.
All Channel Stereo can be used while reproducing 2 channel
stereo software, either analog or Linear PCM.
• When All Channel Stereo is selected, the DSP indicator
lights up on the display.
All Channel Stereo reproduction
Normal stereo sound
All channel stereo
Available Surround modes for each input signal
‡: Possible /
×
: Impossible
Mode
SURROUND DOLBY
DTS
PLII
PLII
LIVE
DANCE
HALL
PAVILION
ALL CH
Signals
OFF (stereo) DIGITAL SURROUND
MOVIE
MUSIC
CLUB
CLUB
ST.
Dolby Digital
‡
‡
Ч
Ч
Ч
Ч
Ч
Ч
Ч
Ч
(Multichannel)
Dolby Digital
‡
Ч
Ч
‡
‡
Ч
Ч
Ч
Ч
Ч
(2 channel)
DTS Digital
Surround
‡
Ч
‡
Ч
Ч
Ч
Ч
Ч
Ч
Ч
(Multichannel)
DTS Digital
Surround
‡
Ч
Ч
‡
‡
Ч
Ч
Ч
Ч
Ч
(2 channel)
Analog
(AUX/FM/AM)
‡
Ч
Ч
‡
‡
‡
‡
‡
‡
‡
or
Linear PCM
L
LFE
LS S RS
C
R
7
The signal indicators on the display window
Light up to indicate the incoming signals.
L:
Lights up when the left channel signal comes in.
C:
Lights up when the center channel signal comes in.
R:
Lights up when the right channel signal comes in.
LFE:
Lights up when the LFE channel signal comes in.
LS:
Lights up when the left surround channel signal
comes in.
RS:
Lights up when the right surround channel signal
comes in.
S:
Lights up when the monaural rear channel signal or 2
channel Dolby Surround signal comes in.
EN33-36TH-V70[UJ]1
02.3.26, 4:46 PM
34