JVC XA-F107A - Manual (Page 63)

19
BASIC OPERATIONS
LISTENING TO FM BROADCASTS
You can listen to a preset (registered) FM station after presetting FM
stations. The following two operation modes are available:
Scan mode: Used to tune in to a station. A.Scan, M.Scan and S.Scan
modes are available for tuning and then presetting.
Radio mode: Used to listen to a preset (registered) FM station. ("Radio"
appears.)
Automatic presetting (Scan mode: A.Scan)
Using A.Scan (Automatic Scan) function, you can automatically preset all
detected stations (up to 20) to preset Nos. P01 to P20.
1. After turning on the player, press MENU button and ¢ / 4 button
to select FM mode from Main Menu, and then press 3 8 button to
enter that mode.
2. Press 7 button to enter scan mode. ("Scan" appears.)
3. Press and hold 3 8 button and then release it.
"A.Scan" appears and automatic scanning starts. After completion,
the player enters radio mode.
To exit scan mode: Press MENU button.
To switch between scan mode and radio mode:
Press 7 button while "Radio" or "Scan" is displayed.
To tune and preset station (Scan mode: M.Scan, S.Scan):
You can listen to the desired station using M.Scan (Manual Scan) or
S.Scan (Search Scan) functions. After tuning, you can preset the
station to the desired preset No., as required.
LVT1542-002A[US]_Eng.book Page 19 Thursday, February 2, 2006 4:46 PM