JVC XA-MP102A - Manual (Page 25)

25
ADVANCED FEATURES
BACKLIGHT
Use to adjust the backlighting extension time (0 to Max) after finishing the
last operation. (Default: 5 seconds) When “Max” is set, the backlighting
remains on for approx. two hours.
To set back light
1. After turning on the player, press MENU button and ¢ / 4 button
to select SET mode from Main Menu, and then press 6 button to
enter that mode.
2. Press ¢ / 4 button to select “BACKLIGHT”.
3. Press 6 button.
4. Press ¢ / 4 button to select the time.
5. Press 6 button to return to SET MENU.
To exit SET mode:
Press MENU button (or select “EXIT” and press 6 button) in the
SET MENU.
• When “Low Battery” appears, backlighting goes out and, after that, it
does not light again.
NOTE
XA-MP52-102(E).book Page 25 Wednesday, October 5, 2005 9:45 AM