John Lewis JLWM 1404 - Manual (Page 25)

7. When no more water comes out,
unscrew the pump cover by turning it
anti-clockwise, using pliers, and remove
the filter. Always keep a towel nearby
to dry up any water spillage when
removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
1
2
8. Remove foreign bodies and fluff from
the pump seat and from the pump
impeller.
9. Check carefully whether the pump
impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
10. Replace the filter into the pump by
inserting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
11. Replace the emergency emptying cap
into the filter cover and fix it firmly.
12. Close the pump door.
Warning!
When the appliance is in use and depending
on the programme selected there can be
hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the appliance
has finished the cycle, and is empty. When
refitting the pump cover, ensure it is
securely re-tightened so as to stop leaks and
young children being able to remove it.
25