JVC LM-H191 - Manual (Page 6)

5
ENGLISH
To adjust the stand height
To change the stand height, change the position of the stand plate as illustrated below after
detaching the stand from the monitor.
• For detaching the stand, see “To detach the stand” on page 4.
Screw holes for higher
position Screw holes for lower
position
Stand plate
Stand plate
<Higher position> <Lower position>
To prevent an accidental fall
Fix the monitor to a wall by using strings.
Fixing the monitor
Attach the hook (not provided) to the VESA mounting holes on the rear panel using M4 x 10 mm
screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using
durable string.
Hook and screws (M4 x 10 mm)
(not provided)
Hook (not provided)
LMH191EA_EN.indd 5 LMH191EA_EN.indd 5 08.4.18 0:45:46 PM 08.4.18 0:45:46 PM