JVC Model KD-ABT22J - Manual (Page 5)

ENGLISH
5 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 31 and 32.
1 Turn on the power.
2 Enter the PSM settings.
3 Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4 Finish the procedure.
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 37.
Audio level meter display
(see “LevelMeter” on page 31)
EN02-07_KD-ABT22[J]3.indd 5 EN02-07_KD-ABT22[J]3.indd 5 12/11/07 1:44:03 PM 12/11/07 1:44:03 PM