GE 24970 GE Universal Remote - Manual (Page 7)

7
Using the number buttons to change audio inputs
To select a device, press the number button (1-6) that
corresponds to the device you want to operate (CD,
TAPE, TUNER, TV, or VIDEO).
Using the function buttons to change audio devices
To select a device, press the FUNCTION button until the
input you want to operate appears on your system.
Operating a CD player or Tape Deck
Use the Play, Forward, Reverse, Record, Stop, and
Pause buttons for CD Players and Tape Decks. In some
case the Preset buttons (CHAN+/CHAN-) may change
tracks on CD Players.
AM/FM Tuner Functions
1. Press the AUDIO button.
2. Press the TUNER (3) button.
3. Press the AM/FM button to toggle between AM
and FM.
4. Use the preset (CHAN+ or CHAN- buttons to
move up and down channel presets.
Home Theater Systems
With GE receivers, a second press of the TV but-
ton turns the receiver on.
1. Turn the TV on.
2. Press the AUDIO button.
3. Select the audio input either by using the
labeled number buttons, or the FUNCTION
button.
4. Press the VOL+ or VOL- buttons to control
volume.
NOTE: The volume buttons may operate both the
TV and the receiver volume at the same time. If
this presents a problem, it may be resolved by
Audio Functions, cont.