JVC TK-C926EG - Manual (Page 17)

17
Setup
Follow the procedures below to connect/set this unit.
Turn off the power of devices to be used before connecting the cables.
K
K
K
K
K
Flow for Connection/Settings
step 1
Mounting the lens ( A Pg. 18)
Mount the lens.
step 2
Connecting the back panel ( A Pg. 20)
Connect the control signal cable, video signal coaxial cable
and the like.
step 3
Mounting the camera ( A Pg. 23)
Mount the camera to the mounting location.
step 4
Adjusting the back focus ( A Pg. 26)
Adjust the back focus.
step 5
Adjusting the lens ( A Pg. 28)
Adjust the lens.
step 6 Adjusting the auto white balance ( A Pg. 30)
TK-C925_EN.book Page 17 Thursday, November 23, 2006 4:33 PM