JVC AV-32X4BA - Manual (Page 36)

34
INSTALL
AV-32X4BA / LCT1674-001A-H / English
3 Press the 6 6 6 6 buttons to choose
“CC” or “CH” according to the CH/
CC number of the TV channel
To cancel the INSERT function:
Press the h (Information) button.
4 Press the Number buttons to enter
the remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
• The CH/CC number is a number
indicating the broadcast frequency to
the TV. If the TV cannot detect the TV
channel corresponding to the broadcast
frequency indicated by the CH/CC
number, a picture in the no-signal state
appears.
„ DELETE
1 Press the 6 6 6 6 buttons to choose a
TV channel
Every time you press the 6 buttons, the
Programme number (PR) is changed over,
and the picture of the TV channel
registered in the Programme number (PR)
appears on the screen.
2 Press the yellow button to delete
the TV channel
The TV channel is deleted from the
Programme numbers (PR) list.
„ MANUAL
1 Press the 6 6 6 6 buttons to choose a
Programme number (PR) to which
you want to register a new TV
channel
2 Press the blue button to activate
the MANUAL function
At the right side following the CH/CC
number, the SYSTEM (broadcasting
system) of the TV channel appears.
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 3 3 3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
If you do not know the correct
broadcasting system, set the SYSTEM to
“B/G”. If “B/G” is not correct, it results in
the fact that you will not hear the sound
normally when the TV detects a TV
channel. In this case, retry to set the
SYSTEM again correctly so that no
problem arises.
D0035-EN
MANUAL
CH / CC PR ID
AV
01
02
03
04
05
06
07
08
09
CH
CH
CH
CH
CH
CH
CC
CC
CC
21
22
23
24
25
26
01
02
03
(B / G)
BBC1
BACK
TV OK
SYSTEM
SEARCH+
SEARCH-
FINE+
FINE-
AV-32X4B_Eng.book Page 34 Monday, June 21, 2004 10:47 AM