JVC 0707TNH-II-IM - Manual (Page 64)

64
Button Functions
Turns the TV on or off.
Press the P OWER button
Note:
• After turning the power on, you can not turn the power off for about one minute.
Power
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: VIDEO-1, 2, 3, DIGITAL-IN1 or DIGITAL-IN2
for video devices like VCRs, DVD players or camcorders.
Press the I NPUT button
By every press of the I NPUT button, you can change the input mode.
Notes:
• When you return to TV mode, press the R ETURN +/TV button or direct 10 key pad or C HANNEL
+/– button.
• You can also access by pressing the I NPUT button on the side of the TV instead of the remote
control.
• If you have a PC connected to the TV, select VIDEO-3.
Input
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
UNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the T UNE button
The TheaterPro D6500K color temperature technology function makes sure that the video you
watch is set to the standard color temperature, so that what you see is as true to what the film
to video editors intended it to be.
Press the T HEATER P RO button
TheaterPro D6500K