JVC KD-S636 - Manual (Page 15)

ENGLISH
15
1
Call up the sound mode you want to adjust.
See page 13 for details.
2
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
and off alternatively. (
= go to step 4)
3
Adjust the bass or treble level.
See page 14 for details.
4
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 13.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 13) to your preference and
store your own adjustments in memory.
Within
5 seconds
SOUND
SEL
LOUD
Within
5 seconds
Within
5 seconds
SOUND
2 3 2 1, 4
13-15.KD-S636.E 98.9.17, 15:21 15