JVC CS-VS601 - Manual (Page 2)

Connection
How to Install
1. To install the speaker in the rear tray, first
determine the appropriate area in which to place
it. The speakers must be installed in a place
where there are spaces of at least 32 mm over
the tray and at least 49 mm under the tray. ln
determining the location, make sure that the
bottom part of each speaker fits into the large
hole in the steel plate on which the rear tray is
fixed.
2. Remove the rear tray.
3. The paper pattern printed on the bottom of the
packing box shows the exact shape of the area
on the rear tray through which the speaker will
be installed. Apply the paper pattern onto the
area determined in 1. above, and trace out the
shape of the area on the tray.
4. Then, cut out the marked area.
5. The next step is to wire the speakers. Be sure to
connect to connect corresponding terminals, i.e.
"left" to "left", "-" to" -", etc.
6. Use the tapping screw and speed nuts provided
to fix the speaker and grille to the rear tray. Match
the 4 screw holes in the speaker frame and the grille
to the holes in the rear tray, insert the 4 screws
in into the holes and secure them with 4 nut.
7. The process for installing the speakers in the
door is much the same as for installing the
speakers in the rear tray. ln this case, however,
extra care must be taken to install the speaker
out of the way of the door handle. lnstall the
speakers with the terminals down.
Amplifier
Woofer
Tweeter
Speed nut
(O4 mm)
x16
Black lined
Black lined
Network cord
x2
Speaker cord
x2
Speaker cord
x2
A
m
p li fi
e r
M
id
w
o o fe
r
T w
e e te
r
2-WAY CROSSOVER NETWORK
12dB/Oct.
WOOFER INPUT TWEETER
2m 2m 4m
Screw
x8
(O4x25mm)
Screw
x4
(O4x20mm)
Screw
x4
(O3.5x20mm)
Screw
x2
(O4x25mm)
Screw nut
x4
(O4mm)
1 2 3 4 5 6
7 8 9
7 11
8
9
Parts
10
1
6
x4
x4
Woofer Mounting
Network
x2
Grille Ass'y 10 11
2-WAY C ROSSOV ER NET WORK 12dB/O ct.
WOOFER INPUT
TWEETE R
Mounting bracket
x2
12 Angle adaptor 13 Fix frame
x2 x2
14
2-WAY CRO SSOV ER NE TWOR K 12dB/ Oct.
WOOFER INPUT TWEETER
-3dB
0dB
Tweeter level adjust
-3dB
0dB
(-3dB)
-3dB
0dB
(-0dB)
Swivel Mounting Flush Mounting
13
3
6
14
x2
x2
Tweeter Mounting
Angle Mounting
2-WAY C ROSSOV ER NET WORK 12dB/O ct.
WOOFER INPUT
TWEETE R 11
Network Mounting
2-WAY CR OSSOVE R NETWO RK 12dB/Oct.
WOOFER INPUT
TWEETER
Surface Mounting
5
4
3 x2
6 x2
14
12
4
5
2 x2
6 x2