The scope of the warranty, Specification – JAMO JAV-61 User Manual

Page 4

Advertising
background image

69449 / 41.2000

The scope of the warranty

The warranty period will come into force as from the purchase date stated on the invoice. The warranty will
apply for the following period of time:

2 years for electronics (power supply, amplifier, etc.)

7 years for other parts (cabinet, speaker units, etc.)

In case of warranty inquiries, please contact your dealer.

In case of request for service under warranty, please enclose your original receipt.

Defects covered by the warranty:
Except for the defects stated below, the warranty covers any production and material defects of the product.

Defects not covered by the warranty:

Defects arising from accidents, misuse, normal wear and tear, mis-maintenance, voltage variation,
overloading, stroke of lightning, and other force majeure events

Defects arising from incorrect installation or operation

Defects arising from modification/repair/attempt of repair by a non-authorised service centre

Defects arising from the use of non-original spare parts

Defects on products with altered or lacking series number

Other defects due to conditions or circumstances beyond the supplier’s control

Transportation costs for servicing are not covered by the warranty.

The supplier is liable only to repair or replace defective parts or products. A replacement cannot exceed the
value of the product under warranty.

Specification:

VIDEO
Gain:

Unity

Input impedance:

75 Ohms

Output impedance:

<3 Ohms

Video insertion loss: 50 Hz - 10mHz < 1dB
In-out isolation:

50 Hz - 10 mHz> 25 dB

Out-out isolation:

50 Hz - 10 mHz> 55 dB

Return loss:

50 Hz - 10 mHz > 20 dB

GENERAL
A/V input/outputs:

RCA-type phone jacks

Power requirements: 16V DC @ 300 mA

(Power supply included)

Power jack:

2.1 mm coaxial type

Dimensions (WxDxH): 10x2¾x1¼in

251x68x32 mm

AUDIO
Gain:

Unity

Input overload:

3.0 V RMS

Input impedance:

>20k Ohms (ea. input)

Output impedance:

<100 Ohms

THD:

0.06%@1.0 V input level

Freq. Responce:

10-45 kHz +/- 1 dB

Channel separation: >75 dB @ 1 kHz
In-out isolation:

>60 dB

Out-out isolation:

>60 dB

Signal to noise:

100 dB (re 2V out)

Advertising