Rtk network base station setup, Attaching rtk harness – John Deere STARFIRE RTK OMPFP11348 User Manual

Page 13

Advertising
background image

900 MHz RTK—Base Station Setup

JS56696,0000801 -19-15APR10-1/1

Attaching RTK Harness

PC8570

—UN—14JUL05

PC8568

—UN—14JUL05

PC8571

—UN—14JUL05

PC8569

—UN—14JUL05

A—Rod

B—Grounding Wire

C—Collar

D—Screw

CAUTION: Avoid serious injury or death to you or

others. Contact your local utility companies to
determine the location of gas, electric, or water
lines. Placement of grounding rod must be a safe
distance away from pipelines and cables.

IMPORTANT: Carefully choose location of rod so that

it is away from paths where it could damage
equipment or be damaged by equipment.

DO NOT route RTK Extension harness along any
other power sources. Keep harness at least 2m
(6 ft) away from any other AC power lines.

1. Attach harness between radio and receiver.

2. Carefully determine placement of rod (A) a safe

distance away from pipelines and cables. Drive into
ground leaving one end above surface.

3. Route grounding wire (B) from harness to rod.

Grounding wire may be extended if necessary to
reach rod.

4. Remove insulation from end of grounding wire.

5. Place collar (C) over end of rod.

6. Place grounding wire between rod and screw (D).

7. Tighten screw.

8. Restrain harness to supporting structures as

necessary to keep them away from equipment,
damage, and to reduce wire strain.

20-5

121511

PN=13

Advertising