Jensen Studebaker SB6060 - Manual (Page 9)

8
Listening to a CD
1. Press the CD button.
"--" blinks for a few seconds, when the CD exit and
enter into CD door, or the unit do not play CD.
2. Open the tray by pressing the OPEN/CLOSE button.
Then put the CD on the tray.
3. Press OPEN/CLOSE button to close the tray, then
press PLAY/PAUSE button to start playing the CD.
The CD will start playing from the first track.
4. Press the F.F button once to go the start of the next track.
5. Press the F.R button once to go back to the start of the current track.
Press the F.R button twice to go back to the start of the previous track.
Fast Reverse (F.R) and Fast Forward (F.F)
You can reverse or forward to any point in a selected track by pushing and
holding the F.R or F.F button.
NOTE: Do not push both buttons together as this may damage the unit.
As the unit is tracking quickly, forward or backward you will hear your selection playing at a distorted
speed. Simply release the depressed button to continue playing at normal speed at the desired
position in the selected track.
6. Pausing the CD play.
Pressing the PLAY/PAUSE button will restart playing the CD where it was paused
7. Stopping the CD play