Jacuzzi Allusion Y200 - Manual (Page 2)

Allusion
®
7242
pure Air® ii BAth
technical Specifications
DimenSionS
72” L x 42” W x 26” H
(1829 mm) L x (1067 mm) W x (660 mm) H
DrAin/overflow
A: 17-3/8” (441 mm) B: 11-15/16” (210 mm)
Cutout
Template provided Part Number BY20000
totAl weight
1161 lb (527 kg) / 55 lb/sq. ft. (268 kg/m
2 )
operAting gAllonAge
Min-Max: 73-94 U.S. Gal. (277-356 Liters)
proDuCt weight
155 lb (70 kg)
Skirt mounting
Not Available
eleCtriCAl SpeCifiCAtionS
requires a dedicated gfCi protected separate circuit.
Blower: 120 VAC, 20 AMP, 60 Hz.
heAter
No water heater is available on this unit. Blower has integral air heater.
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStAllAtion noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
product Shown: Allusion® 7242 pure Air® ii
Bath right hand (Y200) Shown.
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
#BX56000 10/07
Y200
Allusion® 7242 Pure Air® II Bath, Right Hand
(Includes a required drain/actuator kit in chrome)
• Accessories / Hardware:
Trim Kit Rotary: #BN21
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze