How to charge – JVC BH-VC20EG/EK User Manual

Page 9

Advertising
background image

EN-9

ENGLISH

How to charge

* The shape of the plug varies

depending on the country.

1

Connect the power cable to the main unit's AC
connector.

2

Insert the batteries as detailed in "How to insert the
batteries" in the instructions.

3

Insert the power plug into an electrical outlet
(AC220 – 240 V). The charge indicator lights and
begins charging the batteries.
● Do not load or eject batteries during recharging.

4

Four provided batteries can be charged in about 150
minutes.

● When charging is complete, the charge indicator

goes out.

5

Be sure to disconnect the power plug from the outlet
when charging is complete. Then remove the
batteries.

When the batteries being charged or the charger reaches a
temperature of more than 40 °C, the charge indicator blinks
slowly and enters a waiting mode. When the temperature
returns to proper levels, the indicator lights steadily and
automatically resumes charging.

Notes:

● Periodically wipe off the positive and negative terminals of the charger and batteries with a dry cloth. Dirt build-

up may prevent batteries from being charged.

● Batteries may become warm while charging, but this is not malfunction.

● Noise may appear on the radio or television during charging. In this case use an outlet separate from them.

● Avoid charging or discharging close to a heat source (such as in front of a heater or in direct sunlight).

● Charge batteries within the temperature range of 0°C - 40°C .

Advertising