JetAudio iAUDIO U2 - Manual (Page 16)

iAUDIO U2
16
Basic Operations
Power On/Off, Connecting USB
Basic Operations
1. Power On/Off
• Press and hold PLAY until the “iAUDIO” logo appears and the power comes on.
• Press and hold PLAY again to turn it off (power cannot be turned off during recording or in the
USB mode).
• If the AC adapter was connected when you turn it off, the charge window is displayed and iAUDIO
goes into Charge mode.
• To use iAUDIO again in the Charge mode, press and hold PLAY again.
• When you set “Auto Off” or “Sleep Timer”, the power automatically turns off.
Press and hold Play. The iAUDIO turns on and displays the logo. Press and hold Play to turn
power off.
2. Connecting USB
Connecting USB Cable
When you connect the USB cable to the PC while iAUDIO is turned off, used or charged, it enters
USB mode. (The recording is automatically stopped if USB cable is connected during recording).
When the USB cable is connected, the built-in battery is not used. (Maximum of 500mA is used for
the Normal Charge mode and 150mA is used for the Slow Charge mode. Please turn the charge
feature off in Menu or change to Slow Charge mode if the PC is unstable due to overload.)
Disconnecting USB Cable
Before disconnecting, make sure that the status has changed to READY on the iAUDIO LCD.
DO NOT DISCONNECT USB CABLE when the status is Reading or Writing.
READY. Safe to disconnect. READING WRITING