JVC DD-3 - Manual (Page 94)

5
Prep
a
rat
io
n
Setting up the AM loop antenna
Connecting the AM loop antenna
Turn the AM loop antenna to find the best position
for radio reception.
NOTE
• Make sure that the antenna conductors do not
touch any other terminals. This could cause poor
reception.
If reception is poor
NOTE
• A coaxial cable is recommended as it reduces
interference for FM reception.
Connecting the antennas
AM loop antenna (supplied)
If insulation covers the tips of the
antenna cable, twist and pull off
the insulation.
Main unit (rear view)
FM antenna (supplied)
Main unit (rear view)
FM antenna
Stretch out the FM
antenna horizontally.
Main unit (rear view)
Outdoor FM antenna
cable (not supplied)
75 Ω coaxial connector
(not supplied)
Preparation
Do not turn on the power until you complete the connection.
DD-831[A_Ux].book Page 5 Wednesday, August 30, 2006 11:48 AM