JVC TM-A210G - Manual (Page 6)

5
p Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals
e .
The output terminal is bridge-connected.
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
÷ For corresponding video signals, use the VIDEO A
terminal e .
÷ Also refer to BASIC CONNECTION EXAMPLE
on page 12.
q Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals
r .
The output terminal is bridge-connected.
IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
÷ For corresponding video signals, use the VIDEO B
terminals r .
÷ Also refer to BASIC CONNECTION EXAMPLE
on page 12.
w Remote terminals
[REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A
or VIDEO B and ASPECT RATIO is available via external
control. External control is set in the <SET-UP MENU>
screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
Note:
÷ Also refer to BASIC CONNECTION EXAMPLE on
page 12.
REAR VIEW
<Rear Panel>
e Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
÷ For corresponding audio signals, use the AUDIO A
terminals p .
÷ Also refer to BASIC CONNECTION EXAMPLE
on page 12.
r Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
÷For corresponding audio signals, use the AUDIO B
terminals q .
÷When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal has priority.
÷Also refer to BASIC CONNECTION EXAMPLE on
page 12.
t Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]
Y/C (S-video) signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
(The input signal is automatically terminated if a cable is
not connected to the OUT terminals.)
The output terminal is bridge-connected.
IN
: Y/C-separated (S-video) signal input terminal
OUT : Bridge-connected Y/C-separated (S-video) signal
output terminal
Notes:
÷For corresponding audio signals, use the AUDIO B
terminals q .
÷When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal has priority.
÷Also refer to BASIC CONNECTION EXAMPLE on
page 13.
External control switch
Open circuit Closed circuit
(open) (short)
ASPECT RATIO 4–3 (4:3) 16–9 (16:9)
INPUT INPUT A INPUT B
External control
functions
ENGLISH
EN_TM_A210GE.p65 03.3.12, 7:11 PM 5