JVC TM-A170G - Manual (Page 8)

1-8
TM-A170G
ENGLISH
Problems
No power supply
.
No picture with the power on. No sound. Shaking picture. No colors, wrong color
, or dark picture.
Unnatural, irregularly colored, or distorted picture. Dark stripes appear at the top and bottom of the screen, picture vertically squeezed. Function buttons on the front panel do not function. The INPUT SELECT buttons do not function.
Points to be checked
Is the power plug loosened or disconnected? Is the main power turned OFF? Is the video signal output from the connected component? Is the input signal selected properly? Is the video cable disconnected? Is the audio signal output from the connected component? Is the volume output set to minimum? Is the audio cable disconnected? Is the monitor close to a device generating a strong magnetic field? Is the color system selected properly? Has the picture control setting (CONTRAST
,
BRIGHT
, CHROMA
or PHASE) been changed?
Is the monitor close to a speaker
, magnet or any
other device generating a strong magnetic field? Is the aspect ratio set to 16:9? Has control of the buttons been locked? (Has the
CONTROL
LOCK
function
been
set
to
ON?)
Is input selection under external control? (Has the INPUT REMOTE function been activated (ON)?)
Measures (Remedy)
Firmly insert the power plug. T
urn the main power ON. (See page 6.)
Set the connected component correctly
.
Select the required video signal input with the Input select button. (See page 7.) Connect the video signal cable firmly
.
(See pages 12 and 13.) Set the connected component correctly
.
Adjust the speaker volume with the VOLUME/ SELECT button. (See page 7.) Connect the audio signal cable firmly
.
(See pags 12 and 13.) Move the device away from the monitor until the picture stabilizes. Set COLOR SYSTEM in the <MENU> screen to AUT
O. (See page 8.)
Set each picture control to the standard setting. (See page 7.) Move the device away from the monitor and turn the monitor
’s
power of
f. W
ait at least 30 minutes,
then turn the power on again. Set
ASPECT
RA
TIO in the <MENU> screen to
[4 : 3 (4 – 3)]. (See page 8.) When controlling externally
,
ASPECT
RA
TIO
should be set to [4 : 3 (4 – 3)]. (See page 14.) Set CONTROL
LOCK in the <SET
-UP
MENU>
screen to OFF
. (See pages 9 and 10.)
Set INPUT
REMOTE in the <SET
-UP
MENU>
screen to OFF
. (See pages 9 and 10.)
TROUBLESHOOTING
Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. The following are not malfunctions: ●
When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored.
This is due to t
he
structure of the cathode ray tube and will be deleted when another image is displayed.
●
Y
ou experience a mild electric shock when you touch the picture tube.
This phenomenon is due to a normal buildup of static
electricity on the CR
T
and is not harmful.
●
The monitor emits a strange sound when the room temperature changes suddenly
.
This is only a problem if an abnormality
appears on the screen as well.
●
If two or more monitors are operated next to each other
, their images may shake or be distorted.
This phenomenon is due to
mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power of
f on any monitor that is not being used.
15
10
15
2
14
HOW TO USE EXTERNAL CONTROL
Ⅵ
ABOUT
EXTERNAL
CONTROL
This monitor is provided with an external control terminal. The function is controlled with H and L (short-circuit/open with the 15th pin GND) Note: ●
The
ASPECT
RA
TIO or INPUT
function can be controlled via the REMOTE terminal by setting
ASPECT
REMOTE or INPUT
REMOTE to ON in the <SET
-UP
MENU> screen. (Refer to pages 9 and 10.)
Connections
Connect (short-circuit) the 15th terminal (GND) to the 2nd or 10th terminals in the 3-line 15-pin D-sub connector
. Do not conne
ct
other terminals.
External control switch
Open circuit
C
losed circuit
(open)
(short)
ASPECT RA
TIO
4-3 (4:3)
16-9 (16:9)
External control functions
External control switch
Open circuit (open) Closed circuit (short)
ASPECT
External control switch
Open circuit
C
losed circuit
(open)
(short)
INPUT
INPUT
A
INPUT
B
External control functions
External control switch
Open circuit (open)
Closed circuit (short)
INPUT
GND