JVC AV-36260 - Manual (Page 13)

Connections
13
The connection diagrams are intended to show some basic general connections. Some
cable companies may require special connections to properly use your television or
2-tuner PIP function. If you follow these diagrams and either the television or PIP does not
work properly, contact your local cable operator for more connection information. Please
see page 44 for more information on the PIP feature.
S VIDEO VIDEO INPUT 1 R L MONO
INPUT 4
AUDIO OVER
R L
75 Ω (VHF / UHF)
COMPONENT VIDEO IN
AV COMPULINK EX AUDIO OUT
VCR
IN
OR
OR
WALL
CABLE or ANTENNA
OUT
TWO-WAY
SPLITTER
Cable and VCR Connections - Continued
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF Input.
3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input.
4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of
the TV.
5) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR
connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.
6) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input
jack.
7) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input
jack.
• Please see page 44 for information on using the PIP feature with a Cable Box.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
Diagram #3